Epygi Technologies Release Note QuadroM8L/26x/12Li/26xi 5.3.53, Edition 1
Please Note: Quadro IP phones firmware control mechanism will not upgrade snom firmware
version from 6.x to 7.x. This should be done manually via snom web site. Once the snom
firmware version is 7.x, the Quadro’s firmware control will automatically upgrade/downgrade the
phone to Epygi’s recommended version but not to 6.x.
Please Note: In the model’s list the Polycom phones with (*) sign are also presented as
Polycom-xx-Pre-3.3.0 due to backward incompatibility of UCSoftware 3.1.1 configuration. It is
recommended to use Pre-3.3.0 models with Application SIP software 3.2.2.0477.
2.4 10BInteraction with other Quadro SW releases
QuadroISDN or QuadroFXO external PSTN gateways used in the shared mode should have SW 5.1.12 or
higher to achieve maximum feature functionality with the QuadroM8L/26x/12Li/26xi SW 5.3.53.
QuadroFXS 16 Gateway should have SW 5.2.1 or higher for PnP configuration with the
QuadroM8L/26x/12Li/26xi SW 5.3.53.
ActiveX Control SW 5.3.0 or higher should be used with 3PCC functions with the
QuadroM8L/26x/12Li/26xi SW 5.3.53.
Auto Dialer SW 1.0.5 or higher should be used with the QuadroM8L/26x/12Li/26xi SW 5.3.53.
DCC SW 1.8 or higher should be used with the QuadroM8L/26x/12Li/26xi SW 5.3.53.
Quadro SMR system SW 1.9 or higher should be used with the QuadroM8L/26x/12Li/26xi SW 5.3.53.
To use QuadroM8L/26x/12Li/26xi SW 5.3.53 with a 3pcc or Click2Dial application the “3pcc/Click2Dial
Login Allowed” checkbox should be enabled for each extension(s) using this feature.
PAGE 4 10-Jul-13
Comments to this Manuals