Epygi Quadro M26xi User Manual download pdf (Page 14)

Epygi Technologies Release Note QuadroM8L/26x/12Li/26xi 5.3.61, Edition 1

PAGE 14 31-Mar-14

4 Changed Features History

The following table provides a high-level list of changed features that have been changed beginning

with the most recent QuadroM8L/26x/12Li/26xi SW release.

5.3.61

5.3.60

Changed the Access List function for Call Park extensions to be similar to Call Pickup. If a

password is set for the Call Park extension, when the parked call is answered the system

will prompt for a password only if the user’s extension is not listed in the access list.

The method for using VLANs to configure the IP phones has been enhanced to allow the

phones to be switched from the Epygi VLAN to the Epygi LAN or WAN without having to do

a factory reset on the phone, which is currently required. The enhancement will not affect

currently configured IP Phones using the Epygi VLAN.

5.3.57

For Time Limited Call routing entries the weekly/monthly start day has been added.

Quadro LOGO changed.

Line Appearance is set to 4 for KX-UT133/KX-UT136 phones.

New parameters have been added to Yealink phones templates.

Possibility to pass PIN description to the CDR downloaded file.

5.3.53

Added display names after extension numbers in the Many Extension Ringing Groups,

allowing users to easily find the desired extension.

Added display names after extension numbers in the Auto Attendant "Create Scenario"

page, allowing users to easily find the desired extension.

The Grandstream GXP2124 phone is added to the phone model list for the Receptionist

Configuration Wizard.

The behavior for the announcement that informs callers that the call is being recorded has

been changed so that the announcement is no longer captured in the recorded file.

Added VoIPVoice.it as a new carrier to the VoIP Carrier Wizard list.

Improvement on "Caller ID Based Services" page. Now user is able to navigate to the

appropriate setting by clicking the links on the ON/OFF status of the service.

When configuring an IP phone in the IP Line settings, it is now possible to paste a copied

MAC address for the IP phone.

Changed the behavior when making changes to parameters that require the IP phone to

be rebooted to take effect.

The system will prompt to reboot the IP phones after changing

the SRTP policy, IP phones template, transport type, and the registration username and

password.

The IP Lines Settings table is now scrollable. Disabled IP lines are hidden from the list by

default.

Improved the way Day/Time settings are shown on the Call Routing GUI. When there is no

rule with Time of Day set, the DT column and the DT description in the glossary are

removed from the bottom of the page. Also, the Call Routing Table’s brief view will now

show an icon of a clock in the DT column.

The “VLAN Settings” page has been moved from “DHCP Settings for the VLAN

Interface” as a submenu to the Network in the main menu.

5.3.23

Added Use RTP proxy mode in Call routing for PBX type calls.

Improved the GUI for Recording Box; recordings are displayed as tabbed page (1000

recordings per page).

snom PA1 template enhancement: "Intercom Policy" has been added for snom PA1. Its

default value is set to "off".

Distinctive Ring tones have been changed for Yealink phones.

snom 7xx phones (720 & 760) have been upgraded to FW version 8.7.3.15.

Recommended FW version for Yealink T3X and VP530 phones is updated to public Version

70 (3x.70.0.100/23.70.0.40 accordingly).

New FW recommendations for Aastra , Grandstream, Cisco and Yealink IP phones.

Added Speed dial based services for Polycom.

Added "Park", DirPckUp, " BargeIn" soft keys on Polycom UCSoftware.3.3.1 or higher.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Comments to this Manuals

No comments

Epygi Quadro M26xi User Manual Page 14

Comments to this Manuals

Related products and manuals for Networking Epygi Quadro M26xi